Desktop CNC router with Closed loop servo control system. Machine and control system are assembled and tested. Ships fully assembled. All metal construction. All motion is carried by ball bearings following precision hardened Steel guideways. Machine has Zero backlash lead nuts on precision acme lead screws, and each axis has preloaded thrust bearings. Table has 1" grid of 1/4-20 tapped holes to aid in part fixturing. Manual handles on each axis to aid in fine adjustment and Zero setting. EZ-CNC training book included. All connecting frame members and traveling table are manufactured from precision ground, cast aluminum plate.
|Table Size||26 x 14|
|Design Style||Fixed Bridge
|Motors/Drives||Closed Loop Servo|
|X and Y Axis
|Z axis Speed (ipm)||90|
|Linear Moving Members||Steel|
|Spindle||1 hp max|
|Voltage||110/120 with 220/240 option|
|Homing Repeatability||.001-.002 inch|
|Resolution||.000089"(11248 steps per inch)|
|Typical Table travel linearity||.0035" TIR or less|
|X-Axis to Y-axis Squareness||.010" / foot or better|
|Spindle Perpendicularity||.0038" / inch or better|
|Table Material Spec||Ground Aluminum Plate, minimum .005/ft flatness|
|System Flatness||.010"/ft max TIR over peripheral test area|
Additional Features: Rubber feet to protect table surfaces, 12 foot power and encoder cables. Wrenches, Safety Glasses, Ear Plugs, Grounding strap.
Ships by UPS ground to US and Canada.
Dust Collector - Static grounded hose and brushed foot. When attached to a shop vac, removes dust and chip from flat sheets up to 2 inches thick.
Spindle Options - Both the Economy and the Pro-Precision spindles are rated at 1 hp.
The Economical Trend T4 has a variable speed controller that provides speeds from 11,000 to 30,000 RPM. It is available with an electrically isolated, magnetic relay box. The relay box permits the CNC controller to turn the spindle on and off, either under program control, or by clicking the buttons on the screen.
The Pro-Precision spindle is a water cooled 3 phase spindle with a cooling system and a variable frequency drive with on/off control and variable speed control through the controller software. The spindle can run from 12,000 to 24,000 rpm. The precision bearings and no motor cooling fan result in a very low noise level ( 72-80db )
Rotary Axis - A rotary 4th axis is available for this machine. The rotary axis has a 3.1" diameter by 12" length capacity. The servo motors permit rotational speed up to 24 rpm. It is not field installable and must be purchased with the machine.
Enclosure - coming soon
Contact probe - Useful for 3D surface scanning. When used with the SYS-3A, can scar directly to 3D stl file with smoothing, reverse compensaiton for probe tip, and filtering for transient peak measurements.
Control Systems - Currently available with the SYS-3A control system. Others available on special request. See this link for a comparison
Software - IMService sells a wide variety of Cad-Cam and controller software. Contact our office if you ned help determining which applicaiton provide the best solution for the parts you want to make.